To learn the correct way of use diesel oil in electric generator

Rational use of diesel oil in electric generator.For example,Steyr WD615 series electric generator used in naturally aspirated,turbocharged and water cooled supercharger types,for now more common to use the supercharged diesel engine,due to the large load,it should use clean dispersion,oxidation security,slow corrosion and abrasion better oil,but some user using ordinary oil to save money,resulting in crankshaft scrapped,not only increasing the transportation costs,but also reduce the traffic.
1.add oil in time.When oil leakage or excessive consumption should be repaired after diesel fuel.
2.change the oil on time.This is a necessary condition to ensure the lubrication system working properly,if long-term not replace oil,oil deteriorate,and mixed with a variety of impurities in the oil,water and dust,lubrication deterioration,failure will increase.
3.Do not mix old and new oil.Few machine hand in order to reduce operating costs and retain a portion of waste oil when changing the oil,plus half or more than half of new oil mix.As everyone knows,this approach is worth the candle.Because the deterioration of the oil contains large amounts of oxidizing substances,colloid carbon particles and iron,etc.,will greatly shorten the life of the new oil,increased speed of moving parts to wear,but also easily lead of bush-burning axle.
4.To prevent mix different oil.Accommodating different grades of oil containers should be clearly marked,respectively,using.Should not mix different grades of oil in the oil filler is used on locomotives.
5.To prevent oil pollution.cleaning device should be sealed to prevent contamination .When you add the oil,should pay attention to refuel tools clean.Pressure to use or over cover long beak add fuel barrels,specifically dedicated barrel, covered with a lid will and mouth blocking tight drums. Dipstick, oil filler at the application of gauze wrap. In addition, when you add the oil can be used fine copper mesh filter.