To improve the performance of diesel generator set start and start diesel generator should be done in the winter .

At present, the way to improve start up performance of diesel generator set, specific have the following kinds:

1. The stress relief method. By decompression for diesel generating sets inlet valve and exhaust valve to reduce the compression ratio, improving the starting resistance to start, this method is used in winter is more, for some small diesel generator set, manufacturers are generally designed specific pressure-relief devices, to reduce the resistance when it is started.

2. Preheating method. Of diesel generating sets of preheating method generally have air preheating method, oil heating and cooling water preheating method, etc., either way for preheating, will be made according to the specific conditions.

3. Artificial turning method. This method is one of the words in big bolt cutter pull (diesel engine flywheel ring gear, before the start of the general to throw to the flywheel ring gear more than two circles. The aim is to decrease the starting resistance.

Diesel generator set users know diesel generators in the winter should pay attention to when using a lot of problems, such as diesel generator maintenance, in the winter of diesel generator problems such as antifreeze. Winter in starting the diesel generating set is an important task of the operators to do the following:

1. Ensure good drainage. 2. Make sure that the battery capacity and voltage meet the requirements. 3. for artificial plate of car diesel generating set. 4.. Under pressure of inlet and exhaust valves. 5. The cooling water heating, guarantee the diesel generating set in thermal state.

I hope my advice can help to you. At the same time I also very glad to help you