Diesel generator can be used for many years

Diesel genset different prices, different brands, different quality. Its service life is not the same. Many factors determine the price, including brand, power, environmental protection, transportation and other expenses. But with age even more difficult to say. Even better crew, if care is not good, not regular use as a diesel generator will be ruined.
      Under normal circumstances, the diesel genset life depends on the normal use, including the proper way to start and stop, normal maintenance and repair unit, the unit load size, the unit lubricating oil and diesel fuel quality, etc., will affect the diesel generator set life.

Korean customer come to our company to place an order to buy diesel genset

Korean customer come to our company to place an order to buy diesel genset,Our leadership and employees together with him to visit the factory, to test center to see diesel generator unit operation.
Korean customer said very satisfied, hope to establish long-term cooperative relationship with our company.

How to carry on the effective management of diesel generator set

Huaquan power as a professional diesel generator supplier,Emphasis in the process of contact with the customer for the diesel generator set the importance of building effective management mechanism, but there are few customers can really do that.Most of our customers in the use after a period of time to relax the requirements, and so may see no harm in the short term, but if long time stay relaxed, can bring a lot of unnecessary trouble to customers, so customer must to effective management of diesel generator set.

The effective management of the specific method is as follows:
1. Diesel generator set there should be a separate room, the door is locked at ordinary times, non-working personnel off-limits.
2. Diesel generating sets of management should grasp the using situation of the unit at any time, to see whether there is a fault.Familiar with the parts maintenance cycle.
3. The switch of diesel generator set at ordinary times should be set in the automatic startup state, for the power for the first time on running, save electricity time reduce the loss.
4. Diesel generating sets of management should have knowledge of the unit, in the state of diesel generator set doesn't work should be based on the knowledge of professional knowledge of diesel generator set maintenance and inspection, will be found and ruled out problems in a timely manner.
These diesel generating set should be operated by personnel management methods, and diesel generator set to the usage, maintenance, repair of put on record, finishing archive, convenient view when necessary.Only strict management and normal operation, the combination of diesel generating sets to play the strongest performance.

soundproof generator room ventilation is good or bad influence the effect of noise reduction

The premise of diesel genset can work normally.To meet the effect of noise reduction at the same time, diesel generating sets of engine room ventilation requirements must be considered, because the diesel generator set runtime needs a lot of fresh air, must be designed to meet the requirements of room air duct, a lot of noise from intakes and exhaust duct spread to the outside of the room.Reasonable design of intakes and exhaust duct is an important link in reducing noise, diesel generating sets of intake and exhaust duct adopt turning air duct, special intake silencer and exhaust silencers, lumen device sound-absorbing materials and perforated sound-absorbing board, at the same time in order to ensure the unit can run normal long press on the rated power, inlet and outlet of the unit must be in accordance with the requirements of the unit using the reserved enough exhaust area, exhaust pipe of the unit with low noise axial flow fan, to ensure room have enough ventilation rate, through the above method is expected to reduce the noise for 25 to 30 db.
Exhaust noise is the main noise sources of the unit, the use of two secondary dead muffler series, is expected to reduce the TL = 30-40 db, on the other hand, the exhaust pipe connection must be sealed performance is good, part of the noise through the exhaust pipe into the atmosphere.
To prevent the unit for a long time after the operation, room temperature rise, affect the output power of the unit, the unit of waste gas exhaust and smoke exhaust muffler for heat insulation and heat preservation processing.

Diesel generating sets have shipment to Cambodia

Diesel generating sets have shipment to Cambodia.
If you want to buy diesel generator,you can contact me any time.
Looking forward to your email.

Diesel engine valve fault judgment

Huaquan power as a professional diesel generator supplier,teach everyone to judge method.
First,Foot valve is a kind of continuous rhythmic, "click" sound, like the coo of the idle speed, medium speed, sound clear, clear, high speed, noise, at the side of the valve chamber to listen to, the noise is more obvious, and the noise from the "fire" and the influence of the temperature of diesel engine. When inspection, remove the valve cover, first make the diesel engine idle running, listen to the sound valve and observe the influence of the lubricating oil splash. Found the valve after the foot ring, application of feeler check valve clearance, such as valve clearance is greater than the standard requirements, should readjust clearance range, after adjusting valve foot ring will disappear. If there is still a slight sound, also cannot adjust the valve clearance again to less than the specified value, otherwise will affect the normal diesel engine power.
Second, valve plunger ring is a sound similar to the small ball land on the SLATE "clicking" sound, hair ring parts in the side of the shaft. When the engine idle speed, noise, medium speed above noise reduced or disappeared. Check, remove the valve cover, with wire hook on the valve plunger adjustment screw, if the noise reduced or disappeared, then the valve plunger ring.
Third, the tapping of a valve spring break, usually of a soft valve springs or broken cause, the sound of it is a kind of "scrape" tapping. Diagnosis, the valve chamber cover will be removed, with auditory and visual inspection, if the multi-cylinder diesel engine, to find out which is the first cylinder valve work is not normal, and then use screwdriver don't live valve spring, if the noise disappear, shows that the cylinder valve spring soft or broken.
Four, valve seat ring loose tapping is caused by the following reasons: materials, heat deformation and loose after kuang, loose fit clearance correctly. Loose valve seat ring will issue a "scrape" tapping, the sound and the valve spring break sound similar, but than valve spring break sound a bit boring, if it is a multi-cylinder diesel engine, the available "cut-off" judging method, if the voice is not reduced during oil cut-off, sometimes more obvious, is the valve seat ring is loose, check the valve cover shall be removed, such as valve clearance is not big and spring didn't break, can conclude that the valve seat loose kuang percussion.